We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
490pcs EM MICROELECTRONIC EM9201 1Mbps low power, low-voltage 2.4GHz transceiver IC $0.5/Pc EM9201V12LF24D+
SKU
GJ170802-143-1
$245.00
In stock
Only 1 left
GJ170802-143-1 N4-3C
Description
EM9201 is a low-voltage 2.4GHz transceiver IC with built-in link-layer logic suitable for proprietary wireless links in the
2.400 … 2.4835 GHz ISM band. EM9201 features a radio core with a low-IF architecture and GFSK modulation scheme being compatible with popular low energy RF standards. Control of the link-layer logic is possible though a standard
SPI interface. To achieve this, an external host-controller MCU is required.
EM9201 includes a special mode called bridge, which allows direct control of the RF interface and which can be used to emulated any proprietary protocol, employing an external FPGA,
EM9201 can operate from a 3 V battery or any other source of power such as any external LDO regulator.
Features
Wide operating voltage range from 1.9V to 3.6V.
Suitable for Lithium battery.
Compatible with low energy GFSK standards
Low drift of PLL frequency by design
1Mb/s On air data rate
Programmable RF output level:
-18 dBm … + 3dBm in 8 steps
No antenna matching elements needed through
appropriate PCB antenna design :
200 Ω differential impedance of antenna port
Low-cost 26MHz Xtal, frequency tolerance +/-30ppm
BLD function: battery level detection in accordance with
selected battery
Current consumption (VCC2 = 2.5V)
14 mA in RX
14 mA in TX (0dBm output power)
0.8 µA in power-down mode
MLF24 4x4 package
Applications
Remote sensing in general
Wireless mouse, keyboard etc.
Wireless sensors in watches
Wireless sports equipment
Alarm and security systems
EM9201 is a low-voltage 2.4GHz transceiver IC with built-in link-layer logic suitable for proprietary wireless links in the
2.400 … 2.4835 GHz ISM band. EM9201 features a radio core with a low-IF architecture and GFSK modulation scheme being compatible with popular low energy RF standards. Control of the link-layer logic is possible though a standard
SPI interface. To achieve this, an external host-controller MCU is required.
EM9201 includes a special mode called bridge, which allows direct control of the RF interface and which can be used to emulated any proprietary protocol, employing an external FPGA,
EM9201 can operate from a 3 V battery or any other source of power such as any external LDO regulator.
Features
Wide operating voltage range from 1.9V to 3.6V.
Suitable for Lithium battery.
Compatible with low energy GFSK standards
Low drift of PLL frequency by design
1Mb/s On air data rate
Programmable RF output level:
-18 dBm … + 3dBm in 8 steps
No antenna matching elements needed through
appropriate PCB antenna design :
200 Ω differential impedance of antenna port
Low-cost 26MHz Xtal, frequency tolerance +/-30ppm
BLD function: battery level detection in accordance with
selected battery
Current consumption (VCC2 = 2.5V)
14 mA in RX
14 mA in TX (0dBm output power)
0.8 µA in power-down mode
MLF24 4x4 package
Applications
Remote sensing in general
Wireless mouse, keyboard etc.
Wireless sensors in watches
Wireless sports equipment
Alarm and security systems
SKU | GJ170802-143-1 |
---|
Log In
Create New Account