We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Atmel AT49BV040 4-Megabit 512K x 8 Single 2.7-volt Battery-Voltage Flash Memory
Atmel AT49BV040 4-Megabit 512K x 8 Single 2.7-volt Battery-Voltage Flash Memory
Features
• Single Voltage for Read and Write: 2.7V to 3.6V (BV), 3.0V to 3.6V (LV)
• Fast Read Access Time - 120 ns
• Internal Program Control and Timer
• 16K bytes Boot Block With Lockout
• Fast Chip Erase Cycle Time - 10 seconds
• Byte-by-Byte Programming - 30 µs/Byte Typical
• Hardware Data Protection
• DATA Polling For End Of Program Detection
• Low Power Dissipation
– 25 mA Active Current
– 50 µA CMOS Standby Current
• Typical 10,000 Write Cycles
• Small Packaging
– 8 x 8 mm CBGA
– 8 x 14 mm V-TSOP
Description
The AT49BV/LV040 are 3-volt-only, 4-megabit Flash memories organized as 524,288 words of 8-bits each. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the devices offer access times to 120 ns with power dissipation of just 90 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 50 µA. The device contains a user-enabled “boot block” protection feature. Two versions of the feature are available: the AT49BV/LV040 locates the boot block at lowest order addresses (“bottom boot”); the AT49BV/LV040T locates it at highest order addresses (“top boot”).
Picture is from real stock.
New and Good physical condition.
Please contact us for more information or pictures.
Location: Shanghai 201801, China. Pick-up is welcome.
SKU | TG02-1122 |
---|
Log In
Create New Account