Schneider CAD32 5p 10A control relay W/ Schneider LADN40 Contact Block

SKU

QLG160905BJ-038

Skip to the end of the images gallery

Skip to the beginning of the images gallery

$36.00

In stock

Only 1 left

QLG160905BJ-038 G18-4C

Category: Default Category

Details

Schneider CAD32 5p 10A control relay W/ Schneider LADN40 Contact Block

CAD32 Schneider Electric 5 pole, 10 AMP relay with an AC rated coil

The Schneirder Electric CAD32 600 volt relays are approved for use around the world. TeSys D relays can be mounted on standard 35 mm DIN rail but can also be mounted directly to a panel. The fixed contacts in these relays have a NEMA A600 and Q600 ratings, in addition to the standard IEC ratings, making them suitable for use in most any control circuit. Top and side mounted auxiliary contacts can be added to a basic five pole relay to make it up to an 11 pole. Special auxiliary contacts are available for switching low power down to 5 volts at 10 mA. Timer and mechanical latch attachments are available.

Features

Easily Installed Accessories
Auxiliary contact blocks with serrated wiping action
Front mount dust tight auxiliary contact blocks
Pneumatic time delay blocks
Transient voltage surge suppressors
Interface modules and electronic timers
Mechanical latching blocks

Schneider Electric / Square D LADN40 Auxiliary Contact Block 690 Volt AC At 25 - 400 Hz, 10 Amp, 4NO, Front Mount

Specifications

Brand/Series	:	TeSys D Series
Contact Form	:	4 NO
Function	:	Contactor
Mounting Type	:	Clip-On
Number of Poles	:	4 Pole
Primary Type	:	Auxiliary Contact
Relay Type	:	Electro Mechanical
Standards	:	UL Listed, CSA Certified, IEC⁄VDE Approved
Temperature, Operating	:	–5 to +60 °C
Terminals	:	Screw Clamp
Termination	:	Spring-Cage
Type	:	Instantaneous
Voltage, Rating	:	690 VAC