日本ORIENTAL MOTOR东方马达步进电机AZM46AC-HS100

SKU
DG180926-010
¥5,183.00
有货
仅剩 1 件
DG180926-010 G0-7B

日本ORIENTAL MOTOR东方马达步进电机AZM46AC-HS100

规格

The AlphaStep AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.

  • Requires AlphaStep AZ Series Driver


*需要连接线(单独销售)

品牌

东方马达Oriental Motor ®

框架尺寸

1.65 英寸 42 毫米

电机长度

4.02 英寸 102 毫米

驱动器电压输入

AC

Speed-Torque Characteristics


Loading zoom

Speed - Torque Characteristics

Holding Torque

708 oz-in5 N·m

Type

Absolute Mechanical Encoder

Shaft/Gear Type

Harmonic Gear

Gear Ratio (X:1)

100 :1

Lost Motion

1.5 arc min or less

Shaft

Single

Electromagnetic Brake

Not Equipped

Resolution (Resolution Setting: 1000 P/R)

0.0036 °/Pulse

Permissible Speed Range (r/min)

0 ~ 35

Rotor Inertia

0.39 oz-in²72×10-7 kg·m²

RoHS Compliant

These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

UL CE

CE Marking

-ow Voltage Directives EMC Directives

Insulation Class

Class B [130°C (266°F)]
[Recognized as 105 (A) by UL.]

Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the following places:
Case - Motor and sensor windings

Dielectric Strength

Sufficient to withstand the following for 1 minute:
Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz

Ambient Temperature

0 ~ 40°C (32 ~ 104°F) (non-freezing)

Ambient Humidity

85% or less (non-condensing)

Degree of Protection

IP66 (excluding the mounting surface and connector)

Shaft Runout

0.05 mm (0.002 in.) T.I.R.

Concentricity

0.075 mm (0.003 in.) T.I.R.

Perpendicularity

0.075 mm (0.003 in.) T.I.R.

Permissible Overhung Load

0 in. from Shaft End = 40 lb0.2 in. from Shaft End = 49 lb0.39 in. from Shaft End = 60 lb0.59 in. from Shaft End = 81 lb0.79 in. from Shaft End = 114 lb0 mm from Shaft End = 180 N5 mm from Shaft End = 220 N10 mm from Shaft End = 270 N15 mm from Shaft End = 360 N20 mm from Shaft End = 510 N

Permissible Axial Load

49 lb

照片实物拍摄,全新现货库存。
欢迎买家自提。发货买家支付运费及包装费用。
保证物品全新没有使用过,保证物品为原装进口正品。
我们不免费提供安装,调试,技术咨询等服务。如需要更多照片,请与我们联系,欢迎上门看货。