英国NIKWAX皮革养护腊油 防水蜡油 15ml 皮具专用护理剂 皮面清洁

1袋15毫升。价格为1袋价格。

英国的天气寒冷而潮湿，故英国人对野外装备防水性要求之高，无人能出其右。Nikwax 创办人 Nick Brown 是一名野外爱好者兼化学师，当他无法为他的登山靴找到一种合适之防水剂时，他便决定自行研制，他在家中厨房中经过反复实验，终于在 1971 年成功研究出他理想的鞋蜡，并以自己之名为名，称为 Nikwax。

针对光面皮革类鞋靴及装备的防水性防水蜡，防水透气。

适用范围：

鞋靴及装备

摩托车骑行，户外运动，马术等皮革类

1. 用海绵或其他用具涂抹所需防水处理的皮革物品（注意接缝处的防水处理）

2. 用布擦除多余渍迹并擦亮皮革表面

注意：

用于一般光面皮，不可用于反绒皮，磨砂皮等。其他特殊皮革请先小面积试用，无变色脱皮后再使用。

请放置在儿童不易触摸的地方。不可食用。不可冷冻，且避免与眼睛直接接触。

不含刺激性气体，不含碳氟化合物，绿色环保。

WaterBased waterproofing cream for smooth leather footwear

High performance waterproofing that can be applied to wet or dry leather giving immediate protection.

The comfort of waterproof footwear is dependent on it supporting feet and being breathable. The structure of leather and therefore the level of support it provides is maintained by tanning agents. When leather absorbs water, tanning agents are lost, which causes leather to stiffen. Also, when leather gets wet the breathability of footwear is impaired, giving you damp feet. Therefore, it’s essential that the Durable Water Repellency (DWR) of your footwear is maintained.
Eventually DWR will wear off and need to be renewed with Nikwax Waterproofing Wax for Leather.

Leather is hardwearing, breathable and provides a high level of support, making it an ideal material for footwear construction. During leather production, tanning agents are added to maintain the structure of leather and prevent microbial growth. If leather becomes wet its breathability will be reduced, leading to wet feet from condensation. Also, when leather absorbs water, tanning agents are lost. Nikwax Waterproofing Wax for Leather™ provides instant Durable Water Repellency (DWR), stopping leather from absorbing water and ‘wetting out’ while maintaining breathability. It also replenishes tanning agents to maintain the support of leather footwear without over-softening.

Anyone who is active outside in damp or wet conditions will benefit from breathable waterproof footwear. Whether you’re a mountaineer or dog walker, or you work outside as a farmer or surveyor, you will need good footwear.

Alternative waterproofing products leave behind a surface coating that can inhibit or reduce breathability, leading to wet feet from condensation.
Also, many waterproofing products are solvent-based waxes or aerosols; alternatively, they may be water-based and use fluorocarbons. Aerosol products are flammable. Fluorocarbons pose a potential risk to the environment and to the long-term health of the consumer.
Solvent-based products also need to be applied to dry materials.
Nikwax Waterproofing Wax for Leather™ is a completely non-flammable, safe product that you can apply to wet or dry leather, providing instant Durable Water Repellency (DWR) while maintaining breathability.

Nikwax Waterproofing Wax for Leather is a safe product to use on breathable waterproof footwear. It provides instant Durable Water Repellency (DWR), maintains breathability and replenishes tanning agents in leather. It is non-flammable, contains no harmful solvents and is free of volatile organic compounds (VOCs) and fluorocarbons. Nikwax Waterproofing Wax for Leather™ has been specifically designed and optimised for smooth leather footwear. The WaterBased formulation is directed to leaks, can be used on wet or dry leather and will not over-soften.

Nikwax takes great care to minimise the effect of Nikwax products on the environment and on you, the consumer. Nikwax waterproofing products are WaterBased, non-aerosol, non-flammable, non-hazardous and environmentally friendly. They contain no harmful solvents or volatile organic compounds (VOCs), and are completely free of fluorocarbons (which have been shown to be persistent in the environment and have been associated with serious health issues).

• Rub the wax thoroughly into wet or dry clean leather, using either the sponge applicator or your fingers, paying special attention to seams.
• Remove any excess with a cloth and buff to a shine.

Note: May darken leather. Test on a hidden area first. Waterproofing Wax for Leather™ will convert nubuck to a smooth waxy finish.

• Leave footwear to dry at room temperature. 
• Paper can be stuffed into the toes to absorb excess moisture, this should be replaced when wet.
• Keep footwear away from fires and radiators, drying too quickly can crack leather and cause bonded soles to peel.