力纳克 推杆 线性驱动器Linak Actuator LA44 250MM 443106+5L2500A0 推力10000N
SKU
JD221102-329 D4区
Special Offers
澳大利亚ihs 可收缩展放酒水吧台 Retractable action station with wheels
特殊价格
¥25,550.00
原价
¥43,792.70
仅剩 1 件
澳大利亚ihs 多媒体展示 工作灶台 带 4个灶 （2个电磁炉 2个电铁板烧） (尺寸约158*80*101CM)
特殊价格
¥58,392.70
原价
¥72,992.70
仅剩 1 件
澳大利亚ihs 多媒体食品展示台 自助餐台 (尺寸：158*80*101CM)
特殊价格
¥26,280.00
原价
¥43,792.70
仅剩 1 件
惠普HP V1Q78A HP 3D710 5L 3D打印机熔剂 适用HP Jet Fusion 4210/4210B 过保质期
特殊价格
¥1,022.00
原价
¥5,102.70
仅剩 1 件
SONY LMD-3251MT 32寸 3D 宽屏全高清医疗液晶显示器
特殊价格
¥16,060.00
原价
¥29,192.70
仅剩 1 件
马克莱文森Mark Levinson NO519 数字音响播放器 CD播放器
特殊价格
¥87,600.00
原价
¥146,000.00
仅剩 1 件
全新带库存备件，照片实物拍摄，买家支付运费
注意：工作周期10%，如连续工作2分钟后，需要停止工作18分钟
The LA44 is available in powerful 10,000 N and 12,000 N versions, ensuring safe patient handling. With the LA44 actuator, LINAK offers a product, which with its wide range of safety options, low noise level, and outstanding performance is the right choice for medical applications such as patient lifts, beds, dental chairs etc.
• Heavy duty actuator
• Safety options such as:
- Manual lowering: makes it possible to turn the inner tube down by hand, in case of emergency, or if electrical
power is not available.
- Spline: potential work injuries are prevented by the spline, as the actuator can only push and not pull, in case
something touches e.g. the lifting boom on a patient lift.
- High side load capacity for high safety: Side load of up to 1000 N is possible without breaking or damaging the
actuator.
- Safety nut: to ensure safe patient handling even when the actuator is no longer new.
• Unique and improved brake to ensure no unintended movement.
Features & Options:
• Load in push: 10,000 N, 12,000 N
• Housing colour: Light grey RAL7035
• Protection class: IPX4, IPX6
• Motor: 24 V DC (standard), 24 V DC (fast)
• Stroke length: 100 - 400 mm (in steps of 5 mm)
• Positioning options: Dual Hall or potentiometer (pot. not for LA44 IC)
• Noise level: 50dB (A) according to DS/EN ISO3743-1
• Safety nut option: Yes, in push
• Nut: Guided (not guided nut with manual lowering)
• Spline options: Mechanical or electrical
• Built-in electrical limit switch: Endstop
• Built-in end stop switches: Mechanical
• Exchangeable cable: Yes, minifit to minifit
• Safety factor: > 2
• Manual lowering: Optional in red or grey
Usage:
• Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use
• Usage temperature: 5ºC to 40ºC
• Storage temperature: -10ºC to +50ºC
• Compatibility: Compatible with LINAK control boxes. Please contact LINAK.
• Approvals: IEC 60601-1, ANSI/AAMI ES60601-1 and CAN/CSA 22.2 No 60601-1
注意：工作周期10%，如连续工作2分钟后，需要停止工作18分钟
LA44
LA44 推杆以强劲的 12,000 N 版本供应，保证病人的安全操作。
使用 LA44 推杆，LINAK 提供的产品安全选项广泛、噪音小并且性能优异，这是 病人移位机、床、牙科治疗椅 等医疗应用的正确选择。
- 重型推杆
- 最大推力：12,000 N 仅用于推动应用
- 最高速度：14 mm/s
- 手动降低：在紧急情况下或断电时可用手调低内管
- 防夹功能：如与某物接触，例如病人移位机上的升降臂，推杆只能推而不能拉时，使用防夹功能可以防止潜在工伤。
- 侧面承载能力强，提高了安全性：侧面负载可以达到 1,000 N， 不会弄断或损坏推杆
- 安全螺母：保证病人的安全操作，甚至在推杆老化时。
- 独特的改进型制动器保证不会发生意外运动
The LA44 is available in powerful 10,000 N and 12,000 N versions, ensuring safe patient handling. With the LA44 actuator, LINAK offers a product, which with its wide range of safety options, low noise level, and outstanding performance is the right choice for medical applications such as patient lifts, beds, dental chairs etc.
• Heavy duty actuator
• Safety options such as:
- Manual lowering: makes it possible to turn the inner tube down by hand, in case of emergency, or if electrical
power is not available.
- Spline: potential work injuries are prevented by the spline, as the actuator can only push and not pull, in case
something touches e.g. the lifting boom on a patient lift.
- High side load capacity for high safety: Side load of up to 1000 N is possible without breaking or damaging the
actuator.
- Safety nut: to ensure safe patient handling even when the actuator is no longer new.
• Unique and improved brake to ensure no unintended movement.
Features & Options:
• Load in push: 10,000 N, 12,000 N
• Housing colour: Light grey RAL7035
• Protection class: IPX4, IPX6
• Motor: 24 V DC (standard), 24 V DC (fast)
• Stroke length: 100 - 400 mm (in steps of 5 mm)
• Positioning options: Dual Hall or potentiometer (pot. not for LA44 IC)
• Noise level: 50dB (A) according to DS/EN ISO3743-1
• Safety nut option: Yes, in push
• Nut: Guided (not guided nut with manual lowering)
• Spline options: Mechanical or electrical
• Built-in electrical limit switch: Endstop
• Built-in end stop switches: Mechanical
• Exchangeable cable: Yes, minifit to minifit
• Safety factor: > 2
• Manual lowering: Optional in red or grey
Usage:
• Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use
• Usage temperature: 5ºC to 40ºC
• Storage temperature: -10ºC to +50ºC
• Compatibility: Compatible with LINAK control boxes. Please contact LINAK.
• Approvals: IEC 60601-1, ANSI/AAMI ES60601-1 and CAN/CSA 22.2 No 60601-1